ground wire การใช้

• Next, look at the wire connector that holds the ground wires.
• In 1960 the National Electrical Code required ground wires in all new houses.
• When a ground wire is involved, the ground connector is green.
• This cable has only the data and signal ground wires connected.
• All of the ground wires are naked ( not insulated ).
• Power and ground wires are often made with red and black.
• I tend to solder power and ground wires first-then wirewrap the signal wires afterwards.
• The whole line is equipped with a single ground wire.
• The ground wire reduces the chance of dangerous electrical shock.
• The Lockwood versions are all wire-braced using a kingpost to support the ground wires.
• The instructions weren't too clear about attaching the ground wire.
• An opto-isolator connects input and output sides with a beam of light ground wires.
• If the box is plastic touch the bare ground wire.
• Out of curiosity, I also measured the voltage between the neutral and ground wires.
• There also shouldn't be enough extra ground wire for it to reach the terminals.
• In this case, the ground wire will not be connected.
• An open ground may occur if the copper ground wire comes loose from its connection.
• The bridge ground wire was connected here with a common connection to the pickguard ground.
• Connect the ground wires as indicated by the manufacturer.
• Never connect the ground wire to a gas pipe.